What Are Electrical Panels? How Should They be Installed?

Wikie Pedia

What Are Electrical Panels - How Should They be InstalledAn electrical panel generally provides electricity to all the fixtures, outlets and rooms within a house. It includes breakers or fuses that may necessitate periodic service or replacement. Building codes for residential structures in Craigieburn specify appropriate locations for standard electrical panels. This ensures that they can be used and installed safely by professionals offering electrical services.

Electrical panels generally hang on the walls of basement or mount within interior walls. They may, however, need horizontal clearance, which prevents their mounting in corners or some other tight space. Their standard installation procedures specify certain limits on where they can be placed. For a piece of interior wall, the panel should not be placed anymore closer than the space between the wall and a stud. If it is a basement, then the panel may be attached near a wall in the corner. But that is only if enough clearance exists…

View original post 253 more words

Advertisements

House Rewiring Considerations

House Rewiring Considerations
House rewiring is a part of house remodelling & is essential for houses, which are 25-30 years older. You may have to take this job as an urgent basis if you feel that the existing wiring has become vulnerable, fragile & hazardous. However, there are even many other reasons as to why you need to consider doing it. Some of you may opt for a complete change in the wiring system while some others may want to change only the layout since the last one was bit old fashioned.

House Rewiring – When Should It Be Done

There are several signs which indicate that a house needs rewiring.

  • There isn’t any earthing present at power points
  • Electrical light sources flicker when any heavy home appliance is used
  • Old wires, which are generally covered up with black rubber
  • Socket outlets of round pin kind
  • Indications of overheating at the socket-outlets
  • Old styled fuse boards & single socket outlets
  • A fuse box having cast iron switches, wooden back or just a haphazard mixture of the fuses
  • A fuse box without any circuit label
  • Unprotected wiring, which hangs on floor board
  • Power loss on using several appliances simultaneously

There are basically two different methods of wiring a house – one is through use of the concealed wires over walls & ceilings and the other one is by installing wires, which pass through these surfaces. Second method needs breaking & re-plastering the surface when rewiring.

However, before making your final decision on rewiring your home, it is important that you consult with a reputed and experienced electrician in Epping. Ask the electrician to do a proper survey of your house wiring layout & ask him or her if a redo is needed.

After all, it is very important that you hire an electrician for doing such jobs rather than considering it to be a DIY because of safety issues. Rewiring all by yourself is not going to be an easy task for you and you can end up hurting yourself or turning everything into a mess if you do not take proper precautions. Electricity isn’t something that you have to experiment or toy with.

The cost of the job however will depend upon the size of your house, layout of circuits and number of electric outlets. Moreover, if you’re planning to change the wiring system completely, it will consume a lot of your money as well as time. Installing a completely new wiring layout even requires a lot of planning and can take up to three to ten days depending upon your requirements and condition of the old wiring.

Major Differences Between Commercial & Residential Wiring

Major Differences Between Commercial & Residential Wiring
Those who tend to assume commercial and residential electrical wiring to be almost the same, should know that there is a sea of differences between the two. The distinctions are primarily in terms of device quality, grade, the way the wires run behind walls and pattern. While commercial systems in Craigieburn generally have a conduit, residential ones do not require it at all. On the other hand, homes possess single-phase power whereas commercial sites have triple-phase. This why there are electricians who offer domestic and commercial electrical services in Craigieburn separately.

Given below are some major differences between commercial and residential wiring:

Type of Wires

Though size of the wires used in outlets, motors and lighting of residential and commercial structures are the same, their types usually vary. Business sites make use of thermoplastic wires coated with nylon to be heat resistant. Some of them even utilise certain special types for areas where exposure to liquids, volatile substances or gases can take place. On the other hand, household wires does not require to be designed so specially.

Conduit

Wiring in residential constructions are normally made to run via inaccessible areas such as interiors, attics and crawl spaces. This reduces chances for the wiring to get damaged due to abrupt mishaps and eliminates the necessity of a conduit. However, wiring in commercial and office premises are run through places where they remain visible. They are protected with a conduit to ensure safety from any external damage.

Phase

Residential buildings primarily utilise single-phase power consisting of a neutral wire and 2 legs of 120 volt each. While testing between the two legs, a voltmeter must display 240 volts. Commercial buildings mostly use three-phase power comprised by two legs of 120 volt, a neutral wire and one wild leg of 208 volt. Three-phase power allows the large motors present in business premises to run efficiently and smoothly.

Heavy-Duty Devices

Certain commercial buildings such as hospitals and healthcare facilities require heavy duty outlets for distributing power to various sensitive equipment. The devices used are more durable and can work within a wider range of temperature than that within residential constructions. They are also resistant to corrosion and chemical hazards, unlike residential outlets that do not feature a heavy duty or highly impact resistant design.

Thus, these are some of the primary differences between commercial and residential wiring. The services required to have them installed or repaired are also different.

Top 4 Projects Requiring An Electrician In Craigieburn

Top 4 Projects Requiring An Electrician In Craigieburn
Electricians are professionals licensed to perform installation and maintenance of electrical equipment. They are also trained to do repairs on inferior quality wire connections, faulty grounding and overloaded circuits. In Craigieburn not always are they deemed necessary for undertaking certain minor tasks, such as fixing a broken wire. But there are some projects which just cannot be completed without the extensive assistance of a putative electrician. Some of them have been discussed below, have a look:

Adding Outlets 

In Craigieburn the electricians are professionally skilled at installing additional outlets or converting the existing ones to ground fault circuit interrupters (GFCIs), which can automatically shut down power in case the electricity load gets unbalanced or water comes into contact with it. Adding outlets involves several extensive tasks, including replacing the wiring and cutting into walls. Making DIY attempts to get them done can result in mishaps or serious damage. It is, therefore, important to call in a reputed electrician for handling the job.

Outdoor Lighting

This is another project which cannot be completed without the help of an experienced electrician in Craigieburn. Installation of security or ambient lighting outside the premises of a residential or commercial property is a highly intricate task requiring careful planning. It only makes sense to let a professional handle it with the right tools. Not only will he or she be able to choose the correct lighting rated for outdoor usage, but also complete the installation flawlessly.

Upgrading Circuit Breaker

Electrical service panels, which are used for providing electricity to an entire home, may sometimes need to be upgraded along with appliances for ensuring adequate supply of power. This is because old breaker boxes may cause blown fuses, flickering lights and so on. Thus, in this case too it is important to call in an electrician who can upgrade circuit breaker panel when a new living space has been added or there are problems with the electricity.

Replacing Fixtures

Although it is possible for a homeowner to replace a few light fixtures, there are still certain jobs, which is not the cup of tea for homeowners. For example, it is best to appoint a qualified and licensed professional to run wire from a circuit breaker with low amperage.

There are several other projects which can prompt one to contact an electrician in Craigieburn. However, the above mentioned ones require the help of a qualified professional imperatively. They should never be attempted by someone who has little or no experience in the field.

When Would You Require An Electrical Contractor?

When Would You Require An Electrical Contractor
Most people assume that an electrical contractor must be hired when there is a need to install new wiring and equipment, or repair or replace old ones. However, there are plenty of applications and projects for which the services of a licensed electrical contractor in Craigieburn may be needed. This blog will help you to form a sound idea about the different situations and circumstances that may necessitate the skills of an electrician:

  • Alarm Installations – If you need to get an alarm installed in your home or office, you will obviously require the assistance of a professional who can efficiently work with electrical equipment. This is because such experts are literally trained dedicatedly for undertaking this kind of task.
  • Emergencies – There are some electricians who remain available 24/7 and can be called in any time of the day for addressing an emergency. However, their service charges can be a bit higher than that of the regular professionals.
  • Renovations – No matter what the size of your renovation project is, at some point you will need to hire an electrician for installing power points, lighting and other such fixtures.
  • Home Automation – If you wish to add a modern touch to your home by turning it into a smart one, the foremost thing you will have to do is locate a licensed and qualified electrical contractor. Not only would he or she help you in planning the requirements, but also provide you suitable suggestions as to what should be appropriate for your home.
  • Solar Power – Thinking about switching to solar power? You are going to need the help of an electrical contractor in that as well, as he or she would install each and every necessary element of the solar system.
  • Home Entertainment Systems – Integrating a complete home entertainment system can be more tedious a task than you might think it is. In order to ensure a smooth and convenient installation, hiring the services of an electrician is a must.

Thus, there are so many projects for which an electrician can be of great help to you. Before hiring one, however, make sure that you understand your requirements properly. Begin your search for a licensed and experienced service provider only after you have done that. For example, decide how many light switches and power points you will need for your project. Convey this detail to the professional you consider for hire. It will allow him or her to prepare a more suitable quote for you.

How To Find A Good Electrician?

How To Find A Good Electrician
As for any other professional, it is important to consider some important factors while choosing a good electrician from among local service providers. With the availability of countless experts, it might be difficult to pick a suitable one. But taking a few essential things into account can make the task easier and also ensure the appointment of a skilled professional.

Stated below are some fundamentals you must consider while looking for a good electrician in Craigieburn:

Verifying License

Verifying the license is one of the most important steps involved in making sure that you choose a professional electrician who would be able to work up to the standards. There are certain codes and regulations surrounding electrical work performed on residential and commercial buildings. Therefore, it is important that you verify license of the service provider you are considering for hire by asking for their unique license number.

Enquiring About Services

Although most electricians offer a bunch of common services, some may have experience or expertise in particular areas which can prove to be advantageous for your requirements. This can include specific experience with commercial structures like office or retail spaces or even a sporting venue. Make sure you ask the professional about all these things before appointing them.

Analysing Reputation & Experience

While licensing ensures that an electrician can provide the necessary services, it alone cannot guarantee that they would be able to offer quality work. On the other hand, a licensed professional with a good reputation and significant experience is more likely to deliver top notch services. In order to check the reputation and experience of an electrician, visit their company’s site and go through the testimonial section carefully to understand how content their previous clients were.

Checking Warranty

A good, experienced and reputed electrician in Craigieburn will always provide warranty for his or her work. The warranty ensures that if any concerns or issues are encountered with the work later on, they would be rectified free of cost. Not only would it save you from the burden of additional expenses, but also grant you peace of mind that your investment is not going into waste.

While you are at the task of locating a skilled electrician by taking the above mentioned factors into account, make sure you consider multiple service providers and get quotes from each one of them. Do not settle for someone whose charges are either too high or too low.